Installation

1. Elastic sublayer

The basis consists of a prefabricated elastic sublayer. This pad is bonded to the subfloor using a solvent-free adhesive.

2. Sealing

The purpose of the first of three synthetic layers poured onto the elastic sublayer is to create seal.

3. Base layer

The second layer is applied thinly, as a final preparation of the floor for the installation of the thicker self-levelling layer that provides mechanical strength to the floor. This synthetic layer provides a solid base and proper fit with walls and floor facilities.

4. Self-levelling top layer

Over the base layer, using the same high-quality material and a colour that matches the final colour of the floor, a top layer is applied, which gives the floor its mechanical strength. During this operation, the material is actually poured and distributed with special tools. The self-levelling nature of the material creates the famous seamless Pulastic top layer.

5. Finishing

Pulastic sports floors derive their very high resistance to wear and matt finish from the final water-based sports floor coating. This coating is available in a wide range of classic colours, design colours and custom colours. The Pulastic sports floor coating is considered the state-of-the-art worldwide.

6. Line marking and logos

The finishing touch for every sports floor is the line marking, applied by our line marking specialists. At this stage, any logos may also be applied.

For various line marking and logo possibilities, please click here.